1 Model: E2B-M12LN08-WP-C2 5M (OMRON E2B series cylindrical proximity sensor)

2 Size: M12 (brass-nickel plated case)

3 Sensing type: Unshielded, double sensing distance (8mm ±10%), setting distance range 0 to 6.4mm

4 Body type: Long body

5 Connection: Pre-wired with 5m PVC cable (4mm diameter, conductor cross-section 0.141mm²)

6 Output: NPN open collector, NC (normally closed) operation mode

7 Environmental protection: IP67 water resistance, oil-mist environment resistant (tested with high concentration oil mist)

8 Indicator: 360° visible yellow LED (easy status check from any direction)

9 Operating conditions: Temperature range -25°C to 70°C, humidity range 35-95% (no condensation/icing)

10 Protection circuits: Output reverse polarity, power source reverse polarity, surge suppressor, short-circuit protection

11 Materials: Sensing surface PBT, clamping nut brass-nickel plated, toothed washer zinc-plated iron

1 Industrial manufacturing lines: Detect presence/absence of metal parts (e.g., automotive components, electronic connectors) on conveyor belts

2 Packaging equipment: Verify proper positioning of metal packaging materials (cans, aluminum foil containers)

3 Automated assembly systems: Confirm metal fasteners (screws, bolts) are correctly installed before robot proceeds

4 CNC machine tools: Detect workpiece presence or tool change completion for safe operation

5 Material handling systems: Check alignment of metal pallets/bins in automated warehouses

6 Printing machinery: Detect metal plates/rollers to maintain correct processing position

1 Do not use with AC power supply (risk of explosion; use 10-30VDC only)

2 Avoid short-circuiting the load; load current must not exceed 200mA

3 Wiring: Follow correct pinout (brown=power positive, blue=power negative, black=output signal)

4 Mounting: Maintain clearances from surrounding metal (M12 unshielded double distance specs: l=15mm, d=40mm, D=15mm, m=20mm, n=40mm)

5 Power-on: Allow 100ms reset time after power supply; supply sensor power first if separate from load

6 Environment: Do not expose to flammable/explosive gases; avoid continuous water immersion

7 Maintenance: Inspect for loose mounting, damaged wiring, metal dust accumulation, abnormal temperature

8 Do not disassemble, repair or modify the sensor (may cause damage or safety risks)

E2B-M12LN08-WP-C2 5M-PDF数据手册-参考资料